Should I Fill All Ram Slots

Posted By admin On 09/04/22
Should I Fill All Ram Slots
  1. Should I Fill All Ram Slots Free
  2. Should I Fill All Ram Slots

The only thing to consider is if you plan on using Dual Channel with your RAM. Alot of MOBOs that support dual channel require pairing of course, but if you fill all the slots it bumps the FSB down! So read very carefully on what your board says about this. This thread has been Locked and is not open to further replies. Additional Notes: For best performance, fill both memory slots, installing an equal memory module in each slot. The likely technical explanation here is that your MacBook (motherboard) supports dual-channel architecture and thus requires two identical memory modules. Benchmarks suggests that it gives a 5-10 percent performance boost. All of AMD's current chips support DDR3 memory, however, some of them are restricted to 1,600MHz or 1,866MHz memory, while only a handful top out at 2,133MHz. Like Intel, these boards do support.

  • Filling all 8 slots will cause a lot more stress on your ram controller and the ram in general. You may have issues with stability that require voltage increases. So unless you require 64GB of ram I would suggest running only 32GB and ensuring they go into the correct slots.
  • That would be 4 sticks with 8GB capacity and 3200 clock speed. It looks like the general consensus here is that I am better off to fill all 4 slots. That is odd because I thought I read somewhere.

Should I Fill All Ram Slots Free

RamShould i fill all ram slots free

Should I Fill All Ram Slots

First, I apologize if this has been covered elsewhere; I searched the forums and didn't find this particular question.
This is my first build, so I have the following background info for my question (at the bottom):
I have 3x4GB sticks of RAM (CMZ4GX3M1A1600C9) from my previous triple-channel mobo. The Maximus Vii hero user guide
indicates that the RAM I have is compatible with the board. The guide says that the 'DIMM Socket Support (Optional)' supports '2',
but not '4'. Which refers to the following:
'(2) Supports two (2) modules inserted into either the red slots or the black slots as one pair of Dual-Channel memory
configuration.'
Question: This might be a newb question, but can I use all three sticks? Configure two of the DIMMs for Dual-Channel, and then
simply add the last stick in the appropriate open slot? Doing so won't cause the Maximus not to POST or somehow damage the
board?
Thanks folks.